Infinitely adaptable floating debris boom
The Debris Boom is an innovative and adaptable floating barrier system that provides segregation, collection, protection and separation for any required span of water. The Debris Boom has been designed specifically to assist with the collection of debris, litter, flotsam, jetsam, weeds and undesirable materials and to prevent these from entering protected areas or bodies of water.
They can be utilised in any length or distance over water and can be permanently anchored or installed in a monitor-free way to take care of all changes in tide, weather and water levels. Our Debris Boom system has been designed to collect and protect in all manor of lakes, rivers, marinas, dams, canals, waterways and hydro intake systems.
Never be caught out again.
Adaptable, multi-use floating barrier solution
The Debris Boom is a floating protective separation device. Installed in any length or distance over water, they’re anchored at each end to a fixed point. The Individual Floats are installed in a long line and fastened to a site specific or individually determined curtain, net, skirt or boom.
The design of the boom, curtain, skirt or net together with the weight, material, depth and so on will determine how many Floats are required. Floats can be installed on both sides of the boom or purely on one side to allow free flow of debris on the collection side.
Debris Boom Gallery
Take a peek at the Debris Boom in use
The Debris Boom has been designed for use in a wide variety of scenarios: rivers, canals, lakes, hydro-electric dams, reservoirs, marinas, etc.
Debris Boom 400
Debris Boom Float
Infinitely adaptable, floating barrier solution
- Height and depth of boom float 400mm (15.75”)
- Width of boom float 200mm (7.87”)
Available Colour Options
- Others available on request (min orders apply)
Features & Benefits
Marinaquip Barrier Floats provide significant benefits over other solutions
Barrier Float FAQ's
Feel free to contact us if you have any questions
Barrier Float is a floating barrier device which sits on the surface of the water between two fixed or floating anchor points of any distance apart. It acts as a high visibility warning, delineator or protective barrier between two sections of water.
Barrier Floats assist with segregation and protection issues on the water in a way no other products have before. delineators and floating barriers have been around for some time, however most are simply ordinary floats strung together in a line and really only provide a visual warning. Others have tried to allow for a bigger and stronger physical presence but generally are not designed for flexible functionality or adaptability to suit individual and site-specific requirements. Barrier Floats from Marinaquip have been engineered for an infinite number of configurations and barrier designs which include, as the norm, the ability to bolt on any additional equipment above and below. Barrier Floats can also be used side by side, one above the other, or both to form larger Floating Barriers, walkways, pontoons, etc.
Barrier Floats have been designed for a multitude of scenarios:
- Debris booms and collection for silt, logs, branches, pollution, weed etc.
- Boat and public protection for rivers/dams/hydro-electric power stations etc.
- Separation/segregation/deliniation on the water of one area from another
- Safety barrier between boats and marine craft in marinas
- Protection for marine wildlife, fish farming, control and aquaculture areas etc.
- Sea wall protection for boats and marine craft in marinas/harbours/ports, etc.
This all depends on the site-specific requirements of the proposed floating barrier or delineator.
The carefully engineered design of the Barrier Floats from Marinaquip allow for an infinite number of customised installations. This may be a short barrier used in a marina between slips to protect manoeuvring boats from each other or it could be a very long and highly visible barrier placed in front of the spillway of a hydro-electric dam to warn and protect the public from the dangers of the spillway. It could be used to protect an area of water from floating and submerged debris with the use of curtains or nets or it could be utilised to restrict access or segregate a commercial or military operation from intrusion.
The uses and installation flexibility are never ending!
The design of the Barrier Float allows for anchoring attachments to be fitted directly on to the floats or for the central chain or rope to be used not only for strength and integrity but also for easily anchoring the boom at numerous strategic points either to the waterway floor or to other floating or rigid infrastructure.
Barrier Floats are rotationally moulded from high-quality virgin polyethylene (plastic) which is super strong and tough and almost indestructible. Two moulded floats are used to make up one complete Barrier Float and two “Dog-Bone” connectors made from high grade Urethane are supplied for use with each. HDPE spacers and “wear discs” are also supplied with each complete float. As are eight sets of 316 Stainless Steel M10 x 90mm nuts, bolts and washers.
Barrier Floats will sustain an incredible amount of use and abuse including collision by and from boats, watercraft, debris, logs etc. We cannot, however, guarantee that penetration and/or puncturing will not occur, nor wearing through of the Polyethylene skin of the float due to us having no control over the conditions of use.
The actual/overall strength of any Barrier Float installation will be down to the strength and integrity of your central rope, chain, line or anchoring points and not the floats themselves.
Our Barrier Floats are made from high quality, high grade materials and under normal usage and circumstances they should easily be lasting over ten years. Studies in New Zealand have shown many Polyethylene marine products to have lasted fifteen to twenty years plus. Please see our warranty terms and conditions for further information.
Barrier Floats themselves do not require any maintenance, however, due to the localised nature and veracity of marine biofouling in your area it may be necessary to clean the Barrier Float from time to time. Our high quality polyethylene is impenetrable to marine biofouling and does not require any anti-fouling treatment, however, slime, weed, barnacles, mussels, oysters, etc. can attach themselves over time as with any other submerged surface. It is suggested that you inspect your Barrier Floats regularly to check for marine growth. If the growth is heavy it will need scraping, cleaning, or water blasting to maintain the correct buoyancy, floatation and of course appearance. Your choice of rope, chain or other central long line and anchor material (together with any additional parts used) will come with their own maintenance requirements.
What they Say
all enquiries welcome
Marinaquip supplies product direct to marinas, municipals, commercial entities and boat owners. We also have a number of international partners and resellers. All enquiries are welcome and we will be pleased to assist with your next project.
For assistance or additional information please contact us or use the form below.
PO Box 428 Silverdale
Phone: +64 9 426 2424
Marinaquip: Delivering fresh ideas, creative designs and genuine solutions for marina operators, marina builders and boat owners.